Plug and Play – Easy setup and operation 48 sec data update, instantaneous average and peak Inside and outside temperature and humidity Wind Speed and Direction including average and gust Wind Chill and Dew point temperature display Barometric Pressure with last 12hr history Rain Gauge with last hour, day, week, month or total Built in data logging for 4080 readings: Unlimited with PC Settable Alarms and Touch Screen Operation 300 Feet wireless range between Sensor and Controller Sensor battery life 2 years on 2 AA LR6 Alkaline batteries Free Easy Weather remote control Windows software
The Green Weather station is a high performance wireless data logging weather station with advanced sensor technology resulting in good accuracy at a low cost. It provides instantaneous and historical data on Inside and Outside Temperature and Humidity, Wind Speed (average and gust), Wind Direction, Barometric Pressure and Rainfall. The back kit touch screen controller logs 4080 data points with adjustable (5 minute minimum) sample interval. There is a memory meter on the display that shows when the memory is getting full so the data can be downloaded and archived to a computer thru the built in USB port and included Weather software. The unit has a radio controlled clock (WWVB) for improved accuracy. The controller runs on 3 AA batteries and can be mounted up to 300 feet away from the sensor array. The sensor array runs up to 2 years on 2 AA batteries so there are no worries with mounting the array on top of a building or tower.
The Green Weather StationTM comes with an advanced sensor array (anemometer, direction meter, temp/humidity sensor, rain gauge, mounting pole), wireless touch screen controller/display, USB cable for connection to a PC, Weather software and pipe clamps for mounting the sensor array to a mast. Note: 5 AA batteries are required but not included
The GPW Series Wind Turbines from Green Vision Technical Services are lightweight at less than 10.5kg and are designed for ease of installation and long service life. The generator is a very low cogging force design for better performance in light winds and is packaged in a fully sealed die cast anodized aluminum enclosure. There are no brushes to wear out or cause electrical noise and the bearings are sealed so the system is maintenance free. The blades are glass reinforced nylon for high strength, UV resistance and fatigue resistance. The turbines are available in 12V and 24V versions. The blade diameter of the 400W is 1.12 meter. The 6 blade design offers better performance in light winds and reduced vibration when spinning at speed.
The GPW series wind turbines have automatic over speed protection to prevent damage in high winds. The blade assembly is removeable as 1 piece for hurricane protection and ease of assembly.
The permanent magnets used are Neodymium Iron Boron (NdFeB) for higher power output.
Mounting is to the top of a 41mm (1.6”) ID standard pole. The hardware used is stainless steel for corrosion protection.
Also includes a Battery Charging Controller to prevent battery over-charge and over-discharge. Controller can be used in conjunction with a solar controller to create a hybrid power system.
Other Information :
We are dealer of hanna instrument USA if you have requirement of any products from hanna instrument you can contact us for pricing details
Green Vision Technical Services offers complete solar kits which include high efficiency solar panel, pole/wall mount, solar battery charge controller and outdoor rated low loss power cable.
The solar panels are high efficiency designs with excellent low light performance. The multi crystalline silicon solar cells are laminated with a TPT (Tedlar/Polyester/Tedlar) and EVA (Ethylene Vinyl Acetate) bi-layer for high reliability and long life. The cell array is sealed in a heavy duty extruded aluminum frame with a high transparency low iron tempered glass cover to protect the solar cells from harsh environments; hail, wind, snow and ice.
The solar panel mounts are heavy gauge aluminum with stainless hardware and facilitate mounting the solar panels to a pole or a south facing wall. The mounts with panels are rated to 110MPH. The solar kits include a 10' 12AWG outdoor rated power cable and a 10A solar battery charge controller.